This is such a cute personalized baby gift. I LOVE it!
First you start off with a bottle of baby wash (my gift is for a boy, so I found some soap that was in a blue bottle). Then you want to gently sand the back of the bottle with a fine grit sandpaper, just enough to make sure the primer witll stick. Next, use some painters tape to tape off the back portion of the bottle, also make sure that you put tape over the cap too so it won't get paint on it. Then spray with an all surface primer.
After the first coat of primer dries, lightly sand again, a prime again. Then you will want to either spray or use an acrylic black paint to put over top. You may have to do one or 2 coats of the black paint. Let dry. 
With your craft cutter (I used my Cricut) to make vinyl lettering that says the baby's name and then soap. The spacing will be 2"x5", so I made my letters 3/4" tall so that they would fit. Then put the lettering on the bottle, and make sure you spray with a matte finishing spray and let it dry.
SO CUTE!
After the first coat of primer dries, lightly sand again, a prime again. Then you will want to either spray or use an acrylic black paint to put over top. You may have to do one or 2 coats of the black paint. Let dry. With your craft cutter (I used my Cricut) to make vinyl lettering that says the baby's name and then soap. The spacing will be 2"x5", so I made my letters 3/4" tall so that they would fit. Then put the lettering on the bottle, and make sure you spray with a matte finishing spray and let it dry.SO CUTE!
No comments:
Post a Comment